Tork Craft Taper Point Tap HSS M14x1.25mm, NR1140-1C
Price range: R140.00 through R154.00 (each excl. VAT)
Tork Craft Taper Point Tap HSS M14x1.25mm, NR1140-1C is a precision HSS ISO hand tap for cutting or restoring accurate internal M14 x 1.25 mm metric fine…
| Qty | Unit Price (each excl. VAT) | You Save |
|---|---|---|
| 10+ | R 154.00 | less 3.9% |
| 50+ | R 147.00 | less 11.1% |
| 100+ | R 140.00 | less 14.3% |
Tork Craft Taper Point Tap HSS M14x1.25mm, NR1140-1C
Tork Craft Taper Point Tap HSS M14x1.25mm, NR1140-1C is a precision HSS ISO hand tap for cutting or restoring accurate internal M14 x 1.25 mm metric fine threads in metal. Supplied singly on a hanging card, it is aimed at automotive, engineering and fabrication work where M14 fine‑pitch fasteners are used in torque‑critical or adjustment‑sensitive assemblies.
Manufactured from high‑grade high‑speed steel and produced to exacting specifications, this tap offers excellent wear resistance, structural hardness and rust/tarnish resistance for long service life. It follows the standard Tork Craft four‑flute, right‑hand plug‑style geometry, helping to clear chips efficiently and produce clean, accurate threads when paired with the correct tapping drill and suitable cutting fluid.
| Minimum Order Quantities | 10+, 50+, 100+ |
|---|
Specifications
- Model: NR1140‑1C
- Type: HSS ISO hand tap, taper/plug style for internal threads
- Thread size: M14 x 1.25 mm (metric fine)
- Standard: ISO metric thread form
- Material: High Speed Steel (HSS)
- Flutes: 4 flutes for extra chip clearance
- Thread direction: Right‑hand
- Pack format: 1 x tap per carded/hanging pack
- Typical applications: Cutting or repairing M14 x 1.25 internal threads in mild steel, aluminium, brass and other machinable alloys in automotive, engineering and general repair work (with cutting fluid)
- Note: Standard tapping data for M14 fine threads suggests a drill size around 12.7–12.8 mm for M14 x 1.25; always confirm against your tapping chart and material before drilling.
Benefits
- Premium HSS construction provides high hardness, wear resistance and thermal stability, keeping cutting edges sharp under continuous workshop use.
- Fine‑pitch M14 x 1.25 thread is ideal for applications requiring precise adjustment and improved resistance to loosening under vibration compared with coarse M14 pitches.
- Four‑flute, right‑hand plug design and precision‑ground profile help produce cleaner, more accurate threads with better chip evacuation and reduced risk of tap breakage.
- Individually carded supply makes it easy to replace a single high‑use fine‑thread size or add this tap to an existing threading kit without purchasing a full set.
Be the first to review “Tork Craft Taper Point Tap HSS M14x1.25mm, NR1140-1C”
Related products
Taps & Die Nuts
Taps & Die Nuts
Taps & Die Nuts
Taps & Die Nuts
Metal Drill Bits
Taps & Die Nuts
Taps & Die Nuts
Taps & Die Nuts
Reviews
There are no reviews yet.