Tork Craft Hole Saw Mandrels Carbide Grit 16-30mm, Non-Metal
Price range: R102.00 through R106.00 (each excl. VAT)
Tork Craft Hole Saw Mandrels Carbide Grit 16–30mm with 6.35mm pilot for driving tungsten‑carbide‑grit hole saws in stone, ceramics and fibreglass.
| Qty | Unit Price (each excl. VAT) | You Save |
|---|---|---|
| 1+ | R 106.00 | |
| 5+ | R 102.00 | less 3.9% |
Tork Craft Hole Saw Mandrels Carbide Grit 16-30mm, for Non-Metalic Materials
Tork Craft Hole Saw Mandrels Carbide Grit16-30mm, for Non-Metalic Materials is a compact arbor designed to drive small tungsten‑/carbide‑grit hole saws from 16 mm up to 30 mm in diameter. With a 3/8 inch hex shank and 6.35 mm pilot drill, it provides secure torque transfer and accurate centring when cutting abrasive materials such as stone, ceramics and fibreglass using compatible carbide‑grit cups.
It fits most leading brands of tungsten‑grit hole saws in this size range, making it ideal for installers, tilers and contractors who frequently drill small openings in hard, brittle surfaces. The hex shank reduces chuck slip, while the pilot drill and threaded connection keep the hole saw firmly seated for controlled cutting in demanding site conditions.
| Weight | 0.8 kg |
|---|---|
| Dimensions | 22.5 × 6.3 × 2 cm |
| Minimum Order Quantities | 1+, 5+ |
Specifications
- Model: TC17002‑2
- Product type: Mandrel / arbor for carbide‑grit (tungsten‑grit) hole saws
- Compatible hole saw sizes: 16–30 mm nominal diameter
- Compatible hole saw type: Carbide‑grit / tungsten‑grit hole saws for abrasive materials
- Shank type and size: 3/8 inch hex shank for standard drill chucks
- Pilot drill: 6.35 mm (1/4 inch) pilot drill
- Typical materials (with suitable carbide‑grit hole saw): Stone, ceramics, concrete paving, fibreglass and similar abrasive materials
- Fits: Most common brands of tungsten‑grit hole saws within the 16–30 mm range
- Approx. tool weight: About 0.08 kg; pack dimensions roughly 225 × 63 × 20 mm (carded pack)
Benefits
- Dedicated to 16–30 mm carbide‑grit hole saws, providing better balance and control for small‑diameter drilling in very abrasive materials.
- 3/8 inch hex shank offers a strong, slip‑resistant grip in the drill chuck, improving torque transfer and reducing spin‑out under load.
- 6.35 mm pilot drill supports accurate centring and smoother starts, helping to reduce wander and edge damage on stone, tiles and fibreglass.
- Compatible with most tungsten‑grit hole saw brands, so a single Tork Craft mandrel can support a mixed set of carbide‑grit cups in this size range.
Be the first to review “Tork Craft Hole Saw Mandrels Carbide Grit 16-30mm, Non-Metal”
Related products
Filters - Regulators
Filters - Regulators
Reviews
There are no reviews yet.